Lunar Eclipse

I stayed up very late last night and watched the eclipse. It was worth it. At some points it looked like the moon was on fire, it was glowing the brightest reds and oranges. Here are some of the photos I took.

The eclipse begins...


Almost dark...


Fully eclipsed, 3:37am PST (yawn)...


Coming back...


I hope you got to see the eclipse from where you are! If you did then you are probably as sleepy as I am :)

Evolution of a Design

I've been looking for a beadmaking technique that will make the design appear to move when the bead is turned. My idea was to design a bead that looked like flowing water.

This was my first attempt:

Then I made the ripples on the water more intense to get more of a shifting look:

I was also looking for something I could make with really bright color, something that looked like a psychedelic 60's acid trip with multi-colored shifting going on. Here is a photo of that bead:

As I was putting colors together and making the bead, I realized that it looks a lot like fire. "Fire" would fit in perfectly with "Water" in a series designed around the four elments.


So now I have water and fire! The next logical step would be to make air and earth. I'll post whatever transpires next.

Silver Plum Vessel

It's been a long time since I've attempted a vessel. There is a little small-scale glassblowing at work here, as I used a hollow stainless tube and blew air down it to puff out the body of the vessel. The handles, top and scrollwork are Silver Plum, and the body is CIM Simply Berry and Effetre transparent Sage Green. I like the results... maybe I'll try a few more!

Spirit in the Bead

A friend of mine just pointed out to me that there is an image of a woman in a bead photo I posted to this blog last month.
Here's the photo:

and here is a close-up of the section with the image:

:-)

Watch Me Create Blog

This is a reminder to check out a great team blog I'm a part of called "Watch Me Create" on WordPress. There are a number of incredible beadmakers who publish articles about their creative process and beautiful pictures of their beads.
Go there now: Watch Me Create

Terra-torial

I know there has been plenty of discussion in the forums about working with Terra, but here's my little tutorial on how I've been encasing it:

Step 1: Ask the Forces of the Universe to set the wind blowing in the right direction...
:-)
Tip: The most important thing I've discovered about this glass is it likes to be worked quickly, because extended heating fades out the colors.

Step 2: I put one layer of Terra straight down on the mandrel as the base bead. I get it really hot, until I see the surface start to turn transparent and get a "shimmer" like what some people see when heating raku. The Terra glass at this point is so hot that it balls up and makes those irksome pointy ends along the mandrel.

Step 3: I take it out of the flame and gently marver it into a cylinder shape to get rid of the pointy ends. I don't put it back in the flame after marvering. I let it continue to cool until a brown color starts to appear, then I gently waft the bead in the end of the flame or just under the flame so the heat is light, and watch for the dark brown color to propagate across the bead.

Wherever dark brown develops on the bead, the color will end up more intense with dark reds, blues and purples. Where light brown forms, the colors will end up in the lighter pink/yellow range. If the desired dark brown does not show up and I'm only getting wisps of light brown across the bead, I reheat the whole thing and start from the beginning. I super-heat it, marver it, and watch for the brown again. I've noticed that Terra can get "tired" after too many re-tries (so can I !!! ). If this happens I take a deep breath, then run a Terra stringer around the bead giving it a fresh layer on top.

Step 4: When I'm satisfied with the brown colors, I take my Terra base bead out of the direct flame and encase it. I do my best not to reheat the Terra base too much which would fade out the dark brown color. After I apply the encasing glass, I marver and shape it just like I would with any normal bead. However, by the time I'm done with my shaping, I cool the bead down a little and look at it and these magnificent colors have magically appeared!

Practice is really the secret to this glass. And the wind blowing in an auspicious direction of course.

Getting Terra-ific Color

I've been continuing to practice with Terra glass during the past week. Up to this point my Terra beads have been less-than-satisfactory. Here is my first attempt at encased Terra from a couple of months ago:

LOL!

Lately however, I've been pleased with the results I'm getting. Practice has improved my techniques. Here is the accomplishment I'm most proud of, a nice little set of brightly-colored encased Terra beads:



I've also been continuing to etch Terra beads. (See this older post: Etching Terra Beads). I like the contrast of textures. Here is a set of etched beads with a Terra base and black stringer decorations. The black parts etched and the Terra remained shiny:


Next post: A tutorial on encasing Terra!